Offers

Extra heavy duty control cable (UD617) for the operation of small manual gearboxes. For use with D1, D2 & D4 controls. Steel end fittings and ...

Scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as those used for engine coo...

Scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as those used for engine coo...

Scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as those used for engine coo...

Revolve™ has designed and developed a unique, full size rollable boat hook that stows into a space not much bigger than a coffee cup. Using next g...

This is a Morse clevis end that is suitable for use with UD617 cables. The clevis end has a 9.5mm pin and a 9.5mm jaw.

Description Maestrini scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as tho...

Description Maestrini scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as tho...

Description Maestrini scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as tho...

Description Maestrini scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as tho...

Description Maestrini scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as tho...

Suitable for thick wooden hulls and bulkheads • Cast in Bronze • Fitted with external anti-rotation nibs on flange • Fitted with heavy duty back nu...

  LLOYD'S APPROVED MARINE EXHAUST Lloyd's Approved WET HOSE 40mm) Bore   APPLICATION: Wet exhaust hose for marine craft TUBE: Black, exhaust gas s...

LLOYD'S APPROVED MARINE EXHAUST HOSE.  2" (51mm) Bore   APPLICATION: Wet exhaust hose for marine craft TUBE: Black, exhaust gas salt water resi...

LLOYD'S APPROVED MARINE EXHAUST HOSE.  1 3/4" (45mm) Bore   APPLICATION: Wet exhaust hose for marine craft TUBE: Black, exhaust gas salt water ...

  LLOYD'S APPROVED MARINE EXHAUST Lloyd's Approved WET HOSE 1 1/2" (38mm) Bore     APPLICATION: Wet exhaust hose for marine craft TUBE: Black, exh...

Part No: Johnson 1027b-1 The Johnson 1027B. Equivalent to Jabsco 1210-0001  flexible neoprene impeller, for 3/4" pumps, has 12 impeller blades and ...

New Eliche Radice 2 blade folding propeller. RRP £950+vat 16 x 11  Right Hand Aluminium Bronze 25mm shaft diameter Standard 1:10 taper 60mm bore le...

Bronze Scoop to fit 1-1/4" Skin Fitting   Description Maestrini slotted scoop strainer plate made from bronze, with a wedge shaped grating. This st...

Bronze Scoop to fit 1-1/2" Skin Fitting   Description Maestrini slotted scoop strainer plate made from bronze, with a wedge shaped grating. This st...

Bronze Scoop to fit 1" Skin Fitting   Description Maestrini slotted scoop strainer plate made from bronze, with a wedge shaped grating. This strain...

Description An economical way of fusing heavy loads 30-80A Fuse NOT included Ideal for battery charger outputs or mains feeds 1/4" (6mm) studs acce...

Description This marine gas bubble tester fluid uses propylene glycol. These are used in conjunction with a bubble tester where Boat Safety Scheme...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged S/S ferrules. RCD a...

7/8" bore  (22mm) PRICE PER METRE Rubber hot water hose

Hot water heater hose 1" bore PRICED PER METRE

Hot water heater hose. 1 1/8"   (22mm) bore PRICED PER METRE

1 1/4" Plastic 'T' piece to suit 1 1/4" barbs to suit 1 1/4" bore hose.

Hot water heater hose. PRICED PER METRE

1 1/2" Plastic 'T' piece to suit 1 1/2" barbs to suit 1 1/2" bore hose.