Newest Products

Description SERVOL PERFORMANCE PLUS 15W/40 APPLICATION: • High quality mineral oil designed for use in modern petrol, diesel and turbo charged eng...

Description Golden Film engine oils are a specialist range of high quality, low detergent/dispersant monograde lubricants. These oils are suitable...

MARINE SAE 10W-40 Classic Marine Oil Description: Marine SAE 10W-40 is a high quality, multigrade engine. The additive level has been chosen and o...

Marine Grade Stainless Steel Split pins 3/16" x 1" 3/16" x 2.75" 1/8" x 4"

This fitting kit is suitable for the fitting of a Morse MT3 single control head.The Morse MT3 fitting kit contains the throttle eye terminal C clip...

LLOYD'S APPROVED MARINE EXHAUST HOSE.  2" (51mm) Bore   APPLICATION: Wet exhaust hose for marine craft TUBE: Black, exhaust gas salt water resi...

Imperial Shaft Sizes Please see other page for Metric shaft sizes PSS Maintenance Kit includes all the items you need to properly maintain your PS...

Imperial diameter 3/4" - 3-3/4" shafts Click here for Metric shafts The Type A PSS Shaft Seal is a mechanical face seal. The sealing surface i...

Gunmetal Bronze Flexible Stuffing box (Stern Gland) Stuffing boxes come packed and ready to fit.  Heavy duty reinforced hose and Lloyd's Approved S...

This is a Morse clevis end that is suitable for use with UD617 cables. The clevis end has a 9.5mm pin and a 9.5mm jaw.

Extra heavy duty control cable (UD617) for the operation of small manual gearboxes. For use with D1, D2 & D4 controls. Steel end fittings and ...

The  propeller pullers allow you remove you propeller both safely and quickly. Avoids the damage often caused when chains, ropes or hammers are us...

Crystal Prop is a self-cleaning, biocide-free, non-exfoliating, long-lasting paint. Designed specifically for use on Propellers, Shafts, Struts, Sa...

8-Way Fuse box complete with transparent cover and gasket. The cable connections are made using the 6.3mm male blade terminals which are fitted on ...

Description • Handy 50ml bottle with applicator • Suitable for LPG Gas, natural gas and non potable water • Metal thread sealant for use with copp...

Description This marine gas bubble tester fluid uses propylene glycol. These are used in conjunction with a bubble tester where Boat Safety Scheme...

Description This leak detector is designed to be connected close to the outlet side of the gas regulator. It then provides an instant visible chec...

Specifications Gas: Propane Inlet:POL 5/8" LH M Nut Outlet: 1/2" BSPF InletPressure: 1 - 16 Bar OperatingPressure: 37mbar Capacity:...

Description Quick solenoid valve EL0511 for diesel and petrol, features 1/2" BSP connections, 7mm ID and 12W power absorption. The solenoid valve ...

This Jabsco Impeller is for the following Pumps: Jabsco 2620-0001, 2620-0051, 2620-1001 and 9900-0001. The Jabsco 18673-0001 Flexible Neoprene Imp...

Zinc Plated for Protection Against Corrosion  We are now offering the R&D Split Shaft Couplings with a Protective Zinc Plating Standard 4" Cla...

The R&D flexible engine mount is designed to be a direct replacement for the Yanmar engine mount Y100. The flexible engine mount has added fea...

The R&D flexible engine mount is designed to be a direct replacement for the Yanmar engine mount 1GM. The flexible engine mount has added feat...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged Stainless Steel fer...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged Stainless Steel fer...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged S/S ferrules. RCD a...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged S/S ferrules. RCD a...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged S/S ferrules. RCD a...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged S/S ferrules. RCD a...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged S/S ferrules. RCD a...

SAILDRIVE – PROVEN PERFORMANCE: Yanmar Volvo Lombardini Bukh Nanni Selva Twin Disc TMC Sonic Hydrodrive With improved blade ge...

R&D Clamp Coupling Yanmar 5" a - Flange outside diameter = 4.72" b - Hole pitch circle = 100mm c - Number of holes = 4 d - Hole size = 10mm e ...

Description Johnson pump inlet strainer with 40 mesh and built-in KlickTite connectors: 1x 1/2" hose - 3/8" BSP (NPT) 1x 3/4" hose - 1/2" BSP (NPT)

Connections: 19mm (3/4") ID hose Dimensions: 120mm long, 70mm wide, 60mm high Prevents unnecessary pump breakdowns caused by particles in the w...

Description Johnson universal pump strainer 09-24652-03 with 20 Mesh and KlickTite port connectors: 2x 1/2" hose - 3/8" BSP 2x 3/4" hose - 1/2" BSP

Description NAVIGATION LIGHTS (12V) MASTHEAD For Boats up to 12M Size: MIDI Case: BLACK Visibility: 225° Dimensions HxWxDmm: 74x58x54 Water resist...