Best Selling Products

3/8" Copper tube in the annealed condition. The diameters on this page ALWAYS refer to the outside diameter of the copper tube. 10 metre coil

For 3/4" to 3-3/4" (20mm to 95mm) shaft diameters EXISTING TYPE A PSS SHAFT SEALS CAN BE UPGRADED BY FITTING A PSS PRO MAINTENANCE KIT As...

Bukh Oil Pressure Sender for DV10, DV20 and DV24 Models

  The SureSeal™ is considered to be the market leader in dripless propeller shaft seal systems, which are standard fit on the majority of prod...

TO SUIT BUKH  GEARBOX DV10 & DV20 & DV24   47MM   FEMALE  REGISTER 4 HOLES  74.5MM   PCD  8.1MM HOLE DIAMETER  COUPLING LENGTH IS 8...

R&D 4" Flexible Coupling 910-004 for BORG WARNER & HURTH Gearbox.   Gearbox Flange:                                              4" diamet...

DV10 DV20

JABSCO Neoprene Flexible impeller Kit THIS COMES WITH GASKET Spline drive, c/w spline seal and gasket. Diameter 65mm,10 Blades ,Blade length 51m...

1/4" Copper tube in the annealed condition. The diameters on this page ALWAYS refer to the outside diameter of the copper tube. 10 metre coil

 SeriesOne™ shaft seal kit is particularly suitable for smaller diameter shafts available in Metric and Imperial sizes, the SeriesOne™ seal is...

LLOYD'S APPROVED MARINE EXHAUST HOSE.   2" (51mm) Bore APPLICATION: Wet exhaust hose for marine craft TUBE: Black, exhaust gas salt water resistan...

Flexible Impeller  Neoprene Compound,12 blades, Splined drive,Shaft diameter 5/8" (16mm) Imp Diameter 57.1mm, Width 31.5mmOnan 132-0162 impell...

Ultraflex B85 Side Mount Control The Ultraflex B85 is a single lever / dual action control to operate both throttle and shift. Suitable for any typ...

Y-10 Fibreglass Stain remover  cleans yellow/brown waterline/transom stains from light colours fibreglass by simply absorption. Paint on, leave app...

Bukh DV20 Head Gasket Set  

Description Golden Film engine oils are a specialist range of high quality, low detergent/dispersant monograde lubricants. These oils are suitable...

  For 35mm shaft diameter. 50mm outside diameter.  140mm long Brass Shelled Water Lubricated "Cutless" Bearing   Please contact us for non-standar...

Water Pump for DV10 DV20.  

 Racor R12T fuel filter elements suitable for the Racor 120A and 140R range of fuel filters. The Racor R12T fuel filter is rated at 10 microns for ...

Bronze Skin Fitting 3/4" BSP Guidi have made a range of skin fittings in Bronze that can either be used on their own or with a Bronze scoop into ...

Stuart Turner Cutless bearing 3/4" x 1-1/4" x 3" These Phenolic sleeved bearings are a replacement for the "All Rubber" (Hexagon Section) Stuart Tu...

DV10 DV20 DV24 NO LONGER AVAILABLE Sold as complete kit. HERE  

Description The Maestrini 405724 ball valve body is constructed from bronze with a stainless steel handle. This ball valve is suitable for hot wate...

40mm x 55mm x 160mm Available to purchase online, or contact us directly. Brass Shelled Water Lubricated "Cutless"     Please contact us for no...

K99 WATER RESISTANT GREASE APPLICATION: Specially designed by Morris to feed evenly around the propeller shaft in the stern tube. PERFORMANCE: Out...

  For 1 3/8" shaft diameter. 1 7/8" outside diameter.  5 1/2" long Brass Shelled Water Lubricated "Cutless" Bearing   Please contact us for non-st...

Lift pump gasket for DV10 & DV20.

Description The Maestrini 405727 ball valve body is constructed from bronze with a stainless steel handle. This ball valve is suitable for hot wate...

Bukh 008E7347 Distributor Plate / 008E9694

The SureSeal™ is considered to be the market leader in dripless propeller shaft seal systems, which are standard fit on the majority of produc...

R&D 5" Flexible Coupling 910-012 for YANMAR Gearbox.   Gearbox Flange:                                              5" diameter.              ...

Waterpump splash ring for DV10 & DV20 610G0109

 Yanmar service kit for 2GM20F, 2GMF, 3GM30F, 3GMF Pre 2000 models with keyway impeller Kit includes :- Oil filter 119305-35170 Fuel filter 104500-...

Bukh DV10 DV20 Water Pump O Ring 560B1032

Yanmar 1GM alternator V-Belt HM29 128170-77350E HM29

For 1 5/8" shaft diameter. 2 1/8" outside diameter.  6 1/2" long Brass Shelled Water Lubricated "Cutless" Bearing   Please contact us for non-s...