Products

Marine Grade Stainless Steel Split pins 3/16" x 1" 3/16" x 2.75" 1/8" x 4"

  For 35mm shaft diameter. 50mm outside diameter.  140mm long Brass Shelled Water Lubricated "Cutless" Bearing   Please contact us for non-standar...

A fast curing, one-part polyurethane that chemically reacts with moisture to deliver strong, flexible bonds to wood, gelcoat and fiberglass. It fo...

A fast curing, one-part polyurethane that chemically reacts with moisture to deliver strong, flexible bonds to wood, gelcoat and fiberglass. It fo...

A bobbin coupling is a double flange coupling, which is used to extend the boat propeller shaft. They can also be used for making a double flexible...

40mm x 55mm x 160mm Available to purchase online, or contact us directly. Brass Shelled Water Lubricated "Cutless"     Please contact us for no...

45mm x 65mm x 160mm Available to purchase online, or contact us directly. Brass Shelled Water Lubricated "Cutless"     Please contact us for non-s...

A bobbin coupling is a double flange coupling, which is used to extend the boat propeller shaft. They can also be used for making a double flexible...

5/16" Copper tube in the annealed condition. The diameters on this page ALWAYS refer to the outside diameter of the copper tube. 10 metre coil

NYLON TUBING - per metre Flexible, natural colour Suitable for pneumatic, fuel and lubrication Working Temperature: -10ºC to +80ºC

50mm x 70mm x 200mm Available to purchase online, or contact us directly. Brass Shelled Water Lubricated "Cutless"     Please contact us for no...

7/8" bore  (22mm) PRICE PER METRE Rubber hot water hose

  For 7/8" shaft diameter. 1 3/8" outside diameter. 3 1/2" long Brass Shelled Water Lubricated "Cutless" Bearing   Please contact us for non-stand...

For 7/8" shaft diameter. 1 1/4" outside diameter. 3 1/2" long Brass Shelled Water Lubricated "Cutless" Bearing   Please contact us for non-stan...

A4 Marine Grade 316 Stainless Steel Nyloc 12mm x 1.75mm 14mm x 2mm 16mm x  2mm 18mm x 2.5mm 20mm x 2.5mm 22mm x 2.5mm 24mm x 3mm 30mm x 3.5mm 36mm ...

Oil extractor sump pump manufactured from aluminium with nitrile rubber gaskets and hose. Simply remove the dipstick from your engine, insert the p...

Description Made in high pressure orange hose (not to exceed 17.5 Bar) and fitted with copper extension spigots held by swaged S/S ferrules. RCD a...

Overview Albin Pump Marine's series of submersible Cartridge Bilge pumps are designed with the latest technology in order to meet the requirements ...

Overview Albin Pump Marine's series of submersible Cartridge Bilge pumps are designed with the latest technology in order to meet the requirements ...

Description This marine gas bubble tester fluid uses propylene glycol. These are used in conjunction with a bubble tester where Boat Safety Scheme...

A galvanised steel M10 stud with fully bonded thick circular plate washer, nuts, washers & terminals. The anode fitting is suitable for wood an...

Aqua Signal Series 40-12V WHITE ALL ROUND / TRI COLOUR   Navigation lights - in a traditional and robust housing.

AquaMarine bilge cleaner combats grease, oil. scale and grime in the bilges and other void spaces.It will also help reduce the growth of mould, mil...

Description An economical way of fusing heavy loads 30-80A Fuse NOT included Ideal for battery charger outputs or mains feeds 1/4" (6mm) studs acce...

As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so acces...

Blakes seacocks have been designed to offer outstanding performance in the marine environment. Built for use as boat intake / outlet valves (seacoc...

Provides medium duty circuit protection for 25 to 150 Amp loads when switching and circuit protection are both required Trip-free - cannot be held ...

Provides medium duty circuit protection for 25 to 150 Amp loads when switching and circuit protection are both required Trip-free - cannot be held ...

The Maestrini pipe connection elbow is made from bronze. This material is tough and corrosion resistant making it suitable for exposure to sea wate...

Description Maestrini straight hose tail fitting made from bronze. The hose tail also features a hexagonal shoulder at the threaded end. Bronze is ...

High quality Bronze with a mirror polished finish To be used in conjunction with a locking tab washer. Here: M14x1.5 Bronze cone nut. 22mm across f...

Full Propeller Nut. Whitworth. BSW. 5/8" 11 threads per inch. 32mm across flats 3/4" 10 threads per inch. 32mm across flats 1".   8 threads per inc...

Bronze Scoop to fit 1" Skin Fitting   Description Maestrini slotted scoop strainer plate made from bronze, with a wedge shaped grating. This strain...

Bronze Scoop to fit 1-1/2" Skin Fitting   Description Maestrini slotted scoop strainer plate made from bronze, with a wedge shaped grating. This st...

Bronze Scoop to fit 1-1/4" Skin Fitting   Description Maestrini slotted scoop strainer plate made from bronze, with a wedge shaped grating. This st...

Bronze Scoop to fit 2" Skin Fitting   Description Maestrini slotted scoop strainer plate made from bronze, with a wedge shaped grating. This strain...